Author: woodshoplifepodcast

Brians Questions:

I hear a lot of talk on forums and social media about buying smaller tools to make more room in your shop. I can see how something like a 52 inch rip fence will take up more room but in my little pea brain it takes as much room to plane and joint a 4 foot board on a 72 inch bed jointer and a 15 inch planer and it does a 46 inch bed jointer and a lunch box planer. Am I wrong? Should I take this into consideration when buying tools? I’m fortunate to have a 1000 sqft shop so space isn’t necessarily at a premium but I’ll also be shop building large built in closets and wine rooms and such so it may get tighter than I think. Thanks for all the info and keep it up. Michael

I know how to sand through the grits. And I know why to sand through the grits. But how long (in general) should you stay at each grit? Obviously higher grits are easy. I usually stay there until any major imperfections are smoothed out. But as I progress, I’m always thinking I should stay there for one more round. Especially at my final grit. Normally I just keep going until the piece “feels” nice and smooth and flat. So far that’s worked for me. I’m sure I’m overthinking it, but figured I’d ask the experts what they do. I’m using an Orbital sander by the way. Sorry for the long winded question, you obviously don’t have to read all that. I ramble haha. Thanks so much. Mick at Broken Levee Woodworks

Guys Questions:

Hey guys and Guy. I’m building a dining table for a friend out of walnut and quarter sawn WO and am starting to think about applying finish. I’m wondering about applying a couple of coats of shellac to deepen the grain and following up with water based poly for the top coat(s). After hearing Guy tout the water based conversion varnish, I’m considering the General Finishes product that has the catalyst you have to mix in. Is that what you use Guy? As far as the shellac, is that a bad idea? I don’t feel confident getting an even coat, especially on the top, using a hand application so I would like to spray. Does that sound feasible? I also don’t want to change the color, jus deepen the grain so what flavor of shellac and cut should I use? Enjoy you guys a lot. My favorite woodworking podcast. Tom Bigmuddy Woodworks

Hey fellas, I have a question about the Domino 500 and 700. What rule(s) of thumb do you use for when to use the 700 instead of the 500 when it’s not an obvious situation? Other than the 3rd’s of the stock thickness. Thanks for all of your different points of view on how to tackle situations we find ourselves in. Matt in AL

Huy’s Questions:

Where do you find the most objective tool reviews? Have a great day Chuck

Alabama ww said he has done half blind dovetails where you cut thru dovetails and add an 1/8 piece on the front. Could you expand on your process for doing this specifically adding the false front and getting it flush to sub front sides. Thank you, Schatz

Guy’s Questions: 

Hi all: First, I love the podcast. I listen to several others as well. This is by far the best, the Premier podcast on woodworking. Your focus on the questions is outstanding. I know that you repeat yourselves often but it it is so helpful to those of us that are trying to learn the craft. I learn something every time I listen. Thanks! My question has to do with spraying a finish. I just bought my first HVLP sprayer. I’ve watched many of the YouTube videos on the basic process with regard to how to tune the gun and the process and motion of applying the finish. Many of the finishes today, especially water based finishes, dry very quickly. So what do you do between coats? Do you always breakdown and clean the gun and all of the other components? Is there some tricks that you use to keep the gun clean and ready for the next coat, without breaking it all down and starting a new? Thanks again, Joe

Hey guys. I’ve been watching all the New Yankee Workshop episodes as they’re being released on YouTube lately. Interesting to see how Norm did things back then, including how some of his techniques evolved over the years. One thing he almost always does is pin his tenons with dowels. I don’t see this much today unless it’s a draw bore, which I don’t see Norm do ever. (This pinning is almost always followed up with one of Norm’s favorite phrases, “That’s never coming apart!”) I guess the question is, should we be pinning tenons? Only in specific circumstances? Only if a draw bore? Peter

Infinity tools pro router table package with 3 1/4 Triton or a Grizzly G1035 shaper that can still run 1/2″ router bits. Always lots of talk about router tables but never anything about smaller shapers. I found this podcast a while ago and have made my way through all the episodes, I really appreciate all the great content, keep it up. Mike

Huy’s Questions:

Hey guys! I know you asked for more questions so I am going to try to help. I have a question about applying Odies Oil with a buffer. I’ve been using Odies because it’s too much work making a spray booth for spray finishing in my woodshop. I have applied Odies by hand with success but it’s a lot of buffing work. Gem buffers are pretty expensive, has anyone tried putting a hook and loop pad on a car buffer and just put a non woven pad on it? Big Cedar table Co.

Can you give any recommendations of hardwoods you enjoy to make furniture with? Alot of the furniture I’ve built in my house has been made from Walnut, White oak and cherry and am looking for something new. I’m looking to build some new furniture for my basement (tv stand, coffee table, maybe a dry bar to match species) but am looking for something new to use other than those stated above. Thanks for all you do. Paul Genereux at Twin Lake Woodshop

Hey, guys. Love the show. Appreciate the fact that you answer questions and although there is a little banter between the three of you, it doesn’t dominate the podcast as other shows do. I want to attend a “convention” for woodworkers and am curious if you have suggestions on what would be a good convention for woodworkers to attend. Thanks in advance! Greg

Brians Questions:

I inherited my dad’s woodworking tools almost 20 years ago. I’ve upgraded several tools over the years. Most significantly, I replaced his Craftsman contractor table saw with a Sawstop PCS 175 5 years ago. I bought it for the safety mechanism, but I’ve really enjoyed using a cabinet saw. While I consistently use the riving knife, I have seldom used the blade guard cover. I like being able to clearly see the blade meeting the wood. Question/topic: how do you balance safety and convenience in your woodshop? Thank you. Chuck

I inherited my dad’s woodworking tools almost 20 years ago. I’ve upgraded several tools over the years. Most significantly, I replaced his Craftsman contractor table saw with a Sawstop PCS 175 5 years ago. I bought it for the safety mechanism, but I’ve really enjoyed using a cabinet saw. While I consistently use the riving knife, I have seldom used the blade guard cover. I like being able to clearly see the blade meeting the wood. Question/topic: how do you balance safety and convenience in your woodshop? Thank you. Chuck

Guys Questions:

Hey Gentleman (and Guy), Thanks for the great podcast. I’m lucky enough to be able to pester Guy directly with my questions, and he’s gracious enough to answer them. Do you have any “Dream Projects”? Something that you have always wanted to build, but just haven’t had the time or resources to do it? Think you will ever get to it? Thanks again for sharing all your knowledge, look forward to hearing your answers -Theo

I’ve heard at least one of you maybe Guy in the beginning say there were quite a few years that went by without a table saw in the shop. I very recently took a big step and got a rikon 14″ deluxe band saw as well as the Makita track saw. My table saw is a deplorable early 90’s job site Makita. really bad fence zero dust collection tiny arbor. It works but guy has maybe once compared a Cadillac vs a pinto and I own the table saw pinto that got into a wreck and then blew up and Given my two recent big purchases what would you say my big limitations are by not having a serious table saw? Can I get by wanting to make boxes? Can I get by without another big purchase such as a table saw? What do you guys see as limitations given my recent purchases? Jim

Huys Questions:

Hey all, another question. I’m wanting to get into spraying finish, I’ve seen the option and have heard decent things about the harbor frieght paint sprayer with regulator which is like 30$. I’m wondering what you guys think of it or if any of you have experiences with it? I have a 30 gal air compressor and I’m only looking at small pieces up to a night stand size, so I think that should suffice? I would love to get a 4 stage but that is very much out of the question price wise. Also I’m looking to mostly spray Shelac and conversion varnish. How easy is it to clean? Guy makes it sound extremely easy so I’m curious if Guy or Hue have any videos about cleaning? Sorry I know it’s long winded but thank you guys for what you do! Look forward to hearing the answers. Blairswoodshop

I have a question about “refinishing” a shelf. I built a floating shelf out of walnut about 2 years ago and did miter-folded edges all the way around. It’s a small shelf, only 32″ long, 3″ tall face, and 6″ deep. My wife would like the same size shelf in white oak. Could i sand back the finish and veneer it in white oak? Or do I need to start from scratch and build a new shelf? Brian

Brians Questions:

Does a combination square needs to be a Starrett ($$$$) or we clan go with cheaper brands. Kind regards from São Paulo – Brazil.

Hey guys, quick question for you. I have an old grizzly 20″ planer and I want to resaw some wood on my bandsaw down to 1/2″ and 1/4″ pieces. The bandsaw is from 1943 and doesn’t leave the best finish. The minimum thickness on the planer is 1/2″ but I see the piece do some shimmying when I put stock that thin through there. What’s the best way to finish planing the stock and finishing it off without access to a drum sander? Any tips would be much appreciated. Love the show and keep up the good work! JARED

Guy’s Questions:

Hey guys. I have been wanting to ask this for a while now. I have been asked by my wife to build dresser for our bedroom. This would be my first time building drawers. I have the cabinet built and the drawer boxes built. But when I put the slides on the drawers just don’t glide like I would think they would. I mean some of them do. I am just not sure what I am doing wrong. I have checked all my spacing for the openings. Could it be my boxes are not square? What is the best way to get them square? Nick.

I’ve been listening for a few years now, and have learned a lot. My most pressing question is about finishing. Recently l’ve built a couple kitchen tables that I really wanted to be special and put a lot of time into them. I thought everything turned out great, but at the final step, topcoating, I got a lot of streaking – more so than I’ve gotten before (although this is a bigger surface area project than I’ve ever done). I stained it, then used AquaCoat water-based grain filler (which left a few minor streaks across the grain that I couldn’t sand out, but I can live with that), and then 3 coats of ArmRSeal satin. After the 3rd coat I had a dull sheen in one spot and so gave it a 4th coat of satin, pretty thick this time, and the sheen streaking got worse. Am assuming that I need to sand it down (and hopefully not get down into the stain) and start again. Someone suggested gloss or semi-gloss ArmRSeal and then a final coat with satin. Is there an easier solution – buff it out?? Mark Schmidt

Huy’s Questions: 

Hello gentlemen. I stumbled across your podcast a few months ago and have been enjoying it ever since. I apologize I have not spent a lot of time going back through older episodes, so this question may have come up already. I’ve been woodworking as a hobby for several years now and enjoy it as my creative outlet. I prefer making smaller pieces as opposed to big furniture but have dabbled with both as gifts and favors to friends. In 2023 I’d like to start turning this into a small business. I enjoy my day job, so this would be more of a side hustle to make enough money to buy more wood and tools (and maybe whiskey 😉). Do you have any tips or tricks for getting started selling projects? Facebook marketplace seems like a dead zone and Etsy seems saturated. Thanks, and I appreciate any advice you have on this subject. Nick Hellman

I am slowly trying to turn my tiny shed into a shop. It is coming along but is not climate controlled. I was recently glueing up some thin strips of wood for an accent on a holiday gift. I live in Oregon, about an hour east of Portland. It doesn’t get super cold here usually, but that week was a bit colder than usual. Anyway, when I went to trim up the strips they came apart where they were glued up. The glue didn’t bond at all. There was just white remnants of dry glue. After asking a friend who is a professional woodworker and reading the label I learned that you can’t use wood glue below 46°. The bottle says not to let it freeze. My friend told me once the bottle freezes it is not good anymore. I bought a new bottle and am keeping it inside the house and doing glue ups inside until the spring. Is this true that once the bottle freezes it’s no good? Any advice for working in the winter in an unheated shop? Should I worry about the wood moving when I bring it inside? Any other products I should worry about in cold temps? Thanks. Happy New Year! Jon Moch